Canon Service Tool Collection (Includes: Selected G-iP-MX-MG Series)

 

  Canon Resetters

NOTE: ITO LANG NAKITA KO SA NET SO IF WALA SA PRINTER NYO ANG KASALI NITO WAG NAPO MUNA MAGREQUEST PO KAYO DITO HIRAP HANAPIN ANG FREE RESET NG BAGONG PRINTERS! AND MUST OF ALL FIRST IS TRY YOU TO EXPERIMENT THESE EXIST RESETTERS IF GUMANA SA PRINTER NYO AND PLS FEEDBACK PO HA!

IT'S RISKY GUMAMIT NG CANON FREE RESET PO SO DAPAT NAKA SUNOD PO SA TAMANG PROCEDURE MAG RESET AND MOST OF ALL IF DI NYO KAYA IPARESET NALANG SA AUTHORIZED CANON PRINTER SERVICE CENTER PARA DI MALAKI ANG GASTO NYO!

PLEASE HELP ME SA PAG CREATE NG TUTORIAL PARA MAKATULONG TAYO SA IBA!

KINUHA KO SA IBA LIBRE! PINA PUBLISH KO DITO SA Mobilarian FORUM LIBRE AT WALANG PPD! DAPAT PAG SHARE NYO NITO SA SITE MO DAPAT LIBRE! WALANG PPD LINKS HA!(SHRINK8.COM, ADF.LY, OUO.IO, ETC) GETS???

LIST OF PRINTERS WERE AVAILABLE THE RESETTERS CLICK HERE!

Service Tool v.4720

Service Tool v.3600

Service Tool v.3400

Service Tool v.3200

Service Tool v.3000

Service Tool v.2000

Service Tool v.1074

Service Tool v.1050

Service Tool v.1020

Password: lace12

Tutorial (Under Construction)

Canon G Series:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press and hold the Stop button.
3. Press and hold the Power button.
4. Release the Stop button (the Power button is still pressed).
5. Press and releasing the Stop button 4 times.
6. Press and hold the Stop button.
7. Release the Power and Stop buttons together.

After the both buttons are released, the power indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.

Reset with Canon Service Tool
· Extract file and open Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer finish printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer ready for use

SA LAHAT NG CANON G SERIES PO

TRY ITONG VIDEO NA NASA YOUTUBE CLICK HERE!

Attached Thumbnails

       

   

EPSON L405

 

EPSON L405 DOWNLOAD RESETTER HERE 

1: Extract the zip file
2: Run “Adjprog.exe” file
3: now you have click on “select button”
4: you should select the printer model name, and click on the “ok” button
5: now you can select a “particular adjustment mode”
6: Next select the “waste ink pad counter” and press “ok” button
7: you can select “main pad counter”, Next press “check” button, showing “reading now box” after showing the result
8: You have to press “initialization” button, now showing a dialogue box you just click “ok”. After showing dialogue box like “please turn off printer” click on “ok”.
Please read this troubleshoot before using Adjustment Program.
Epson Adjustment Program Troubleshoot
1. Printer doesn't respond the commands from Adjustment Program
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).
2. Show License ID or Hardware ID when open adjustment program
Solution:
1. Open AdjProg
2. Show Hardware ID. Press Ctrl+C
3. Open Notepad then press Ctrl+V
4. Open Keygen folder, open WLGen Epson L405/L3110/L4150
5. License Manager
6. Add License
7. Type: Customer name and Company name
8. Copy paste Hardware ID
9. Save
10. Create License Key
11. License Generation - OK
12. Open key folder
13. Your key is ready
14. Then copy the key to l3110/l405/l4150 reset folder
3. Show error "Unknown Exception" when opening the Adjustment Program
Solution:
- Right click Adjprog, run as administrator. If this way fail.
- Disable Antivirus and Windows Defender for a while, then right click Adjprog, run as administrator. After finish using the Adjustment Program, reactivate Antivirus and Windows Defender.
4. Communication error. Error Code : 21000069, 2100012C, 20000010, etc
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

5. This program cannot be used or CRC cheksum error
Solution:
After extract the Epson adjustment program file, then open Adjprog.exe, show error: This program cannot be used or CRC cheksum error.
- Delete the Epson adjustment program folder
- Extract adjprog.rar once again
- Open change date and time settings. Change date according to the information contained in the file.
- Delete folder Adjustment Program on drive C. C:\Adjustment Program
- Re-open Adjprog.exe
- After finish using the Adjustment Program, normalize the date and time settings
6. A DLL file was not found. Click OK button to terminate this program
Solution:
Right click Adjprog, select Properties, select Compatibility, check box "Run this program in compatibility mode for", click OK. Open Adjprog.exe once again.

Epson L455

 

EPSON L455 RESETTER DOWNLOAD HERE

How To Reset Epson Printers?

1: Extract the zip file

2: Run “Adjprog.exe” file

3: now you have click on “select button”

4: you should select the printer model name, and click on the “ok” button

5: now you can select a “particular adjustment mode”

6: Next select the “waste ink pad counter” and press “ok” button

7: you can select “main pad counter”, Next press “check” button, showing “reading now box” after showing the result

8: You have to press “initialization” button, now showing a dialogue box you just click “ok”. After showing dialogue box like “please turn off printer” click on “ok”.

Please read this troubleshoot before using Adjustment Program.

Epson Adjustment Program Troubleshoot

1. Printer doesn't respond the commands from Adjustment Program
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

2. Show License ID or Hardware ID when open adjustment program
Solution:
1. Open AdjProg
2. Show Hardware ID. Press Ctrl+C
3. Open Notepad then press Ctrl+V
4. Open Keygen folder, open WLGen Epson L405/L3110/L4150
5. License Manager
6. Add License
7. Type: Customer name and Company name
8. Copy paste Hardware ID
9. Save
10. Create License Key
11. License Generation - OK
12. Open key folder
13. Your key is ready
14. Then copy the key to l3110/l405/l4150 reset folder

3. Show error "Unknown Exception" when opening the Adjustment Program
Solution:
- Right click Adjprog, run as administrator. If this way fail.
- Disable Antivirus and Windows Defender for a while, then right click Adjprog, run as administrator. After finish using the Adjustment Program, reactivate Antivirus and Windows Defender.

4. Communication error. Error Code : 21000069, 2100012C, 20000010, etc
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

5. This program cannot be used or CRC cheksum error
Solution:
After extract the Epson adjustment program file, then open Adjprog.exe, show error: This program cannot be used or CRC cheksum error.
- Delete the Epson adjustment program folder
- Extract adjprog.rar once again

- Open change date and time settings. Change date according to the information contained in the file.
- Delete folder Adjustment Program on drive C. C:\Adjustment Program
- Re-open Adjprog.exe
- After finish using the Adjustment Program, normalize the date and time settings

6. A DLL file was not found. Click OK button to terminate this program
Solution:
Right click Adjprog, select Properties, select Compatibility, check box "Run this program in compatibility mode for", click OK. Open Adjprog.exe once again.

Epson L500-L510-L520-L540-L550

Epson L500-L510-L520-L540-L550

How To Reset Epson Printers?

1: Extract the zip file

2: Run “Adjprog.exe” file

3: now you have click on “select button”

4: you should select the printer model name, and click on the “ok” button

5: now you can select a “particular adjustment mode”

6: Next select the “waste ink pad counter” and press “ok” button

7: you can select “main pad counter”, Next press “check” button, showing “reading now box” after showing the result

8: You have to press “initialization” button, now showing a dialogue box you just click “ok”. After showing dialogue box like “please turn off printer” click on “ok”.

Please read this troubleshoot before using Adjustment Program.

Epson Adjustment Program Troubleshoot

1. Printer doesn't respond the commands from Adjustment Program
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

2. Show License ID or Hardware ID when open adjustment program
Solution:
1. Open AdjProg
2. Show Hardware ID. Press Ctrl+C
3. Open Notepad then press Ctrl+V
4. Open Keygen folder, open WLGen Epson L405/L3110/L4150
5. License Manager
6. Add License
7. Type: Customer name and Company name
8. Copy paste Hardware ID
9. Save
10. Create License Key
11. License Generation - OK
12. Open key folder
13. Your key is ready
14. Then copy the key to l3110/l405/l4150 reset folder

3. Show error "Unknown Exception" when opening the Adjustment Program
Solution:
- Right click Adjprog, run as administrator. If this way fail.
- Disable Antivirus and Windows Defender for a while, then right click Adjprog, run as administrator. After finish using the Adjustment Program, reactivate Antivirus and Windows Defender.

4. Communication error. Error Code : 21000069, 2100012C, 20000010, etc
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

5. This program cannot be used or CRC cheksum error
Solution:
After extract the Epson adjustment program file, then open Adjprog.exe, show error: This program cannot be used or CRC cheksum error.
- Delete the Epson adjustment program folder
- Extract adjprog.rar once again

- Open change date and time settings. Change date according to the information contained in the file.
- Delete folder Adjustment Program on drive C. C:\Adjustment Program
- Re-open Adjprog.exe
- After finish using the Adjustment Program, normalize the date and time settings

6. A DLL file was not found. Click OK button to terminate this program
Solution:
Right click Adjprog, select Properties, select Compatibility, check box "Run this program in compatibility mode for", click OK. Open Adjprog.exe once again.

If you have trouble doing it, I suggest asking for help from the nearest printer repair professional.

Credits to youtube.com

 

Epson L555

Epson L555

How To Reset Epson Printers?

1: Extract the zip file

2: Run “Adjprog.exe” file

3: now you have click on “select button”

4: you should select the printer model name, and click on the “ok” button

5: now you can select a “particular adjustment mode”

6: Next select the “waste ink pad counter” and press “ok” button

7: you can select “main pad counter”, Next press “check” button, showing “reading now box” after showing the result

8: You have to press “initialization” button, now showing a dialogue box you just click “ok”. After showing dialogue box like “please turn off printer” click on “ok”.

Please read this troubleshoot before using Adjustment Program.

Epson Adjustment Program Troubleshoot

1. Printer doesn't respond the commands from Adjustment Program
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

2. Show License ID or Hardware ID when open adjustment program
Solution:
1. Open AdjProg
2. Show Hardware ID. Press Ctrl+C
3. Open Notepad then press Ctrl+V
4. Open Keygen folder, open WLGen Epson L405/L3110/L4150
5. License Manager
6. Add License
7. Type: Customer name and Company name
8. Copy paste Hardware ID
9. Save
10. Create License Key
11. License Generation - OK
12. Open key folder
13. Your key is ready
14. Then copy the key to l3110/l405/l4150 reset folder

3. Show error "Unknown Exception" when opening the Adjustment Program
Solution:
- Right click Adjprog, run as administrator. If this way fail.
- Disable Antivirus and Windows Defender for a while, then right click Adjprog, run as administrator. After finish using the Adjustment Program, reactivate Antivirus and Windows Defender.

4. Communication error. Error Code : 21000069, 2100012C, 20000010, etc
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

5. This program cannot be used or CRC cheksum error
Solution:
After extract the Epson adjustment program file, then open Adjprog.exe, show error: This program cannot be used or CRC cheksum error.
- Delete the Epson adjustment program folder
- Extract adjprog.rar once again

- Open change date and time settings. Change date according to the information contained in the file.
- Delete folder Adjustment Program on drive C. C:\Adjustment Program
- Re-open Adjprog.exe
- After finish using the Adjustment Program, normalize the date and time settings

6. A DLL file was not found. Click OK button to terminate this program
Solution:
Right click Adjprog, select Properties, select Compatibility, check box "Run this program in compatibility mode for", click OK. Open Adjprog.exe once again.

If you have trouble doing it, I suggest asking for help from the nearest printer repair professional.

Credits to youtube.com

 

Epson L565

DOWNLOAD HERE l565

1: Extract the zip file

2: Run “Adjprog.exe” file

3: now you have click on “select button”

4: you should select the printer model name, and click on the “ok” button

5: now you can select a “particular adjustment mode”

6: Next select the “waste ink pad counter” and press “ok” button

7: you can select “main pad counter”, Next press “check” button, showing “reading now box” after showing the result

8: You have to press “initialization” button, now showing a dialogue box you just click “ok”. After showing dialogue box like “please turn off printer” click on “ok”.

Please read this troubleshoot before using Adjustment Program.

Epson Adjustment Program Troubleshoot

1. Printer doesn't respond the commands from Adjustment Program
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

2. Show License ID or Hardware ID when open adjustment program
Solution:
1. Open AdjProg
2. Show Hardware ID. Press Ctrl+C
3. Open Notepad then press Ctrl+V
4. Open Keygen folder, open WLGen Epson L405/L3110/L4150
5. License Manager
6. Add License
7. Type: Customer name and Company name
8. Copy paste Hardware ID
9. Save
10. Create License Key
11. License Generation - OK
12. Open key folder
13. Your key is ready
14. Then copy the key to l3110/l405/l4150 reset folder

3. Show error "Unknown Exception" when opening the Adjustment Program
Solution:
- Right click Adjprog, run as administrator. If this way fail.
- Disable Antivirus and Windows Defender for a while, then right click Adjprog, run as administrator. After finish using the Adjustment Program, reactivate Antivirus and Windows Defender.

4. Communication error. Error Code : 21000069, 2100012C, 20000010, etc
Solution:
After the Adjustment Program window opens, press SELECT, in the PORT section, specify the USB Port printer (don't use Auto Selection).

5. This program cannot be used or CRC cheksum error
Solution:
After extract the Epson adjustment program file, then open Adjprog.exe, show error: This program cannot be used or CRC cheksum error.
- Delete the Epson adjustment program folder
- Extract adjprog.rar once again

- Open change date and time settings. Change date according to the information contained in the file.
- Delete folder Adjustment Program on drive C. C:\Adjustment Program
- Re-open Adjprog.exe
- After finish using the Adjustment Program, normalize the date and time settings

6. A DLL file was not found. Click OK button to terminate this program
Solution:
Right click Adjprog, select Properties, select Compatibility, check box "Run this program in compatibility mode for", click OK. Open Adjprog.exe once again.

If you have trouble doing it, I suggest asking for help from the nearest printer repair professional.

Credits to youtube.com